FENTON REPAIR

LLC

                             TONUTTI PRODUCTS

WE ARE NOW OFFERING A NEW (TO US) PRODUCT LINE FOR YOUR INSPECTION.  TONUTTI AGRICULTURAL EQUIPMENT IS AVAILABLE TO YOU AT THIS TIME.  THIS TONUTTI EQUIPMENT IS ITALIAN MADE WITH A DISTRIBUTION AND SERVICE CENTER LOCATED IN THE USA.  

WE ARE ANXIOUS FOR YOU TO SEE THESE PRODUCTS AND WILL SHOW THEM TO YOU IN THE FOLLOWING INFORMATION.    PLEASE CONTACT FENTON REPAIR AT 1-563-933-4321 AND ASK FOR DAVE FOR PRICING AND TO ANSWER ANY QUESTIONS YOU MAY HAVE.

 

 

 

                           TONUTTI  HAY  RAKES

                                             THREE POINT HITCH HAY RAKE - P SERIES   

THE TONUTTI P RAKES ARE THE IDEAL SOLUTION FOR HOBBY FARMERS, HORSE FARMERS, FOR FARMERS WHO NEED TO CLEAN UP ON THEIR PROPERTY OR IN MOUNTAIN AREAS DUE TO ITS SMALL DIMENSIONS AND 3-POINT HITCH MOUNT.

THE SIMPLICITY OF THE TONUTTI P SERIES ALONG WITH THE INDEPENDENCE OF EACH COMPONENT ALLOW THE RAKE TO ADAPT ITSELF PERFECTLY TO ALL KINDS OF UNEVEN TERRAIN.  TOGETHER WITH THE SPECIAL SHAPED TINES WHICH FILTER ALL KINDS OF DIRT AND STONES, THE P RAKE PRODUCES A PERFECTLY CLEAN WINDROW.

THIS RAKE REQUIRES VERY LITTLE MAINTENANCE.   ALL TONUTTI 3-POINT HITCH HAY RAKES P SERIES HAVE STANDARD PARTS THAT ARE INTER-CHANGEABLE.

THREE POINT HITCH HAY RAKES - P SERIES

 SPECIFICATION P2T P3T P4 P5 P6
 FINGER WHEELS
 23
4
5
6
 FINGER WHEEL DIAMETER
 55"55"
55"
55"
55"
 TRACTOR HORSEPOWER
 20 HP
 20 HP
 25 HP
 25 HP
 30 HP
 TINE DIAMETER
 6.4 mm
 6.4 mm
 6.4 mm
6.4 mm
6.4 mm
 MAXIMUM WORKING WIDTH
 4' 6'7' 6"
9' 3" 
11' 4"
 WEIGHT 156 LB
 220 LB
 352 LB
407 LB
506 LB
 TRANSPORT WIDTH
8' 4"
10' 8"
4' 7"
7' 4"
7' 4"
 APPROPRIATE WORKING SPEED
 14 mph
14 mph
14 mph
14 mph
14 mph

 

                                         RTP CARTED RAKES

 

 

THE TONUTTI CARTED RAKES HAVE AN ADJUSTABLE SHOCK-ABSORBER TO PROVIDE SMOOTH PERFORMANCE EVEN ON ROUGH AND UNEVEN TERRAIN.

TURNBUCKLES ON EACH SIDE TO EASILY FINE TUNE THE WINDROW WIDTH IN A FEW SECONDS ON THE FIELD.  TURNBUCKLES CAN BE ADJUSTED TO OFF-SET WINDROWS TO ONE OR THE OTHER SIDE, WHICH MAKES IT EASY TO RAKE TWO WINDROWS TOGETHER.

WIDE RANGE OF POSSIBLE WINDROW WIDTH ADJUSTMENTS BY SLIDING THE SIDE RAKE FRAMES ACROSS THE TOOL BAR FRAME.

EITHER SIDE OF THE MACHINE CAN BE EASILY LOCKED IN TRANSPORT POSITION TO RAKE ONLY WITH ONE SIDE.

a)  UNLOCKED POSITION OF ONE SIDE OF THE RTP RAKE

b)  LOCKED POSITION WITH LOCK PIN FOR TRANSPORT OR RAKING WITH ONLY ONE SIDE.

TWO SINGLE ACTING HYDRAULIC CYLINDERS TO RAISE RAKE SIDE FRAMES ON-THE-GO FROM THE TRACTOR CAB.

OPTIONS:

HOSE KIT TO CONVERT IT'S HYDRAULICS TO DOUBLE-ACTING FOR BETTER CONTROL OF THE RAKE WHEN WORKING ON STEEP INCLINES

CENTER KICKER WHEEL TO TURN CENTER OF WINDROW BY HALF TO FLUFF UP CROP, INCREASE DRY-DOWN AND  TO PREVENT THE NEED TO RUN YOUR BALER PICKUP IN THE GROUND.

 

 TECHNICAL CHARACTERISTICS
 RTP 8
 RTP10RTP 12
 WHEELS 810
12
 WHEEL DIAMETER
 55"
55"
55"
 TRACTOR HORSEPOWER
 2020
25
 HITCHCLEVIS
 CLEVISCLEVIS
 MAXIMUM RAKING WIDTH
 19' 8"
22'
24'
 WINDROW WIDTH3' 5"
3' 6"  
3' 6"
 WEIGHT1038 lb.
1174 lb.
1386 lb.
 TRANSPORT WIDTH
10'
10' 6"
11' 4"
 APPROPRIATE WORKING SPEED
14 mph
 14 mph
14 mph
 MINIMUM HYDRAULIC REQUIREMENTS
1000 psi
1000 psi
1000 psi
 HITCH JACK
STANDARD
STANDARD
STANDARD
 TIRES185/65-14
185/65-14
185/65-14

 

 OPTIONS RTP 8
RTP 10
RTP 12
 CENTER KICKER WHEEL
  •  
  •  
  •  
 HOSE KIT TO TRANSFORM HYDRAULICS INTO DOUBLE ACTING
  •  
  •  
  •  

 

                                   RAPTOR  V  HAY RAKES

 

 

 

EASY SET-UP OF THE TONUTTI RAPTOR IN ONLY 4 STEPS:

UNLOCK THE SAFETY BAR WHICH PREVENTS THE OPENING OF THE MACHINE DURING TRANSPORTATION ON THE ROAD

CONNECT HYDRAULICS

ADJUST GROUND PRESSURE OF FINGER WHEELS THROUGH A SIMPLE CRANK ON EACH SIDE.

ADJUST WINDROW WIDTH, ALSO THROUGH A SIMPLE CRANK ON EACH SIDE BY OPENING AND CLOSING THE TWO REAR FINGER WHEELS.  THIS TONUTTI PATENTED SOLUTION IS THE EASIEST AND FASTEST ON THE MARKET.  THERE IS NO NEED TO OPEN OR CLOSE THE REAR FRAME, WHICH GUARANTEES A MUCH HIGHER STABILITY OF THE WHOLE MACHINE.

OFF-SET WINDROW - THANKS TO THE INDEPENDENT SETTING OF THE LAST TWO FINGER WHEELS, THE WINDROW CAN BE ALSO OFF-SET TO ONE OR THE OTHER SIDE BY OPENING OR CLOSING THE REAR FINGER WHEELS TO DIFFERENT ANGLES.  IN THIS WAY TWO WINDROWS CAN BE COMBINED INTO ONE BY PASSING AGAIN ON THE SAME SPOT.

 

 SPECIFICATIONSV10 2GW
V10 4GW
 V12 4GW
V14 4GW
 FINGER WHEELS
 1010
12
14
 FINGER WHEELS DIAMETER
 55"
55"
55"
55"
 TRACTOR HORSEPOWER
20
30
30
30
 TINES DIAMETER
7 mm
7 mm
7 mm
7 mm
 MAXIMUM WORKING WIDTH
 19' 6"
19' 6" 
22' 5"
26' 5"
 WINDROW WIDTH
4' - 6'
4' - 6'
4' - 6'
4' - 6'
 WEIGHT2134 lb
2068 lb
2266 lb
2464 lb
 TRANSPORT WIDTH
8'
8'
8'
8'
 APPROPRIATE WORKING SPEED
14 mph
14 mph
14 mph
14 mph
 MINIMUM HYDRAULIC REQUIREMENTS
1000 psi
1000 psi
1000 psi
1000 psi
 TIRES(2) 185/65-14
(4) 185/65-14
 (4) 185/65-14
 (14) 185/65-14

 

 OPTIONS

CENTER KICKER WHEELS
 
  •  
  •  
  •  
WIND SHIELDS
  •  
  •  
  •  
  •  
LIGHTING KIT
  •  
  •  
  •  
  •  
TANDEM WHEELS
  •  
   

 

                   TRAILED IN-LINE PULL-TYPE HAY RAKE 

                                                       T9/97  TRAILED IN-LINE HAY RAKE

 

THE TONUTTI THREE INLINE TRAILED RAKES HAVE BEEN DESIGNED FOR USE WITH BIG BALERS.  THE SUPERIOR WIDTH ALLOWS FOR GREATER ACCURACY AND SPEED, WHILE MAINTAINING SUPERIOR HANDLING ABILITIES.

THE THIRD GROUND WHEEL PERMITS A BETTER RAKING JOB WITH WIDER WORKING WIDTHS, IN COMPARISON TO THE TRADITIONAL TWO GROUND WHEEL PULL-TYPE HAY RAKES.

PULLING THE RAKE IS VERY EASY AND SIMPLE AND CAN BE EFFECTED WITH ONE SINGLE OPERATOR.

THE PULL-TYPE HAY RAKE IS IDEAL FOR SHORT CROPS SINCE EACH SPRING LOADED FINGER WHEEL FOLLOWS THE GROUND CONTOURS ACCURATELY.  THE SPECIFICALLY DESIGNED DRAW BAR WITH SPRING LOADED PINS ALLOWS CHANGE OF WORKING SETTINGS FROM THE TRACTOR SEAT.

 

 MODEL T6 T9 T13
 Description InLineInLine
InLine
 Raking Wheels
 69
13
 Ground Wheels
 33
4

 TRAILED INLINE, HEAVY DUTY HAY RAKE

 

 

                TONUTTI DOMINATOR PULL TYPE V RAKES

  DOMINATOR V 14 NO MORE NUTS and BOLTS TO UNSCREW or TIGHTEN, NO MORE SLIDING REAR FRAME MEMBERS, NO MORE MECHANICAL ADJUSTMENTS ON REAR FRAME, NO MORE HYDRAULIC SETTINGS

A SIMPLE ADJUSTMENT TO THE LAST RAKE WHEELS WILL DETERMINE YOUR WINDROW WIDTH.

NEW & IMPROVED FEATURES TAKE THE DOMINATOR RAKE TO THE VERY TOP.

 

        SHOWING LEGAL ROAD TRANSPORT WIDTH                               WINDROW WIDTH ADJUSTER MECHANISM

 

 

MODEL
 V 10
V 12
V 14
DESCRIPTION
High Capacity V
High Capacity V
High Capacity V
GROUND WHEELS
 44
4
SPLITTER WHEELS
 YesYes
Yes
FINGER WHEELS
 1012
14
POWER REQUIREMENTS
 30 HP
30 HP
30 HP
WEIGHT
 3168 lb.
3366 lb.
3564 lb.
TRANSPORT WIDTH
 8' 2"
 8' 2"
 8' 2"
SPEED
 1414
14
TIRES 205/60-15205/60-15
205/60-15
RAKE WHEELS
 55"55"
55"
MAX. RAKING WIDTH
 21' 4"
24' 8"
 28'

 

                             TONUTTI ROTARY HAY RAKES

 ROTARY HAY RAKES  (RW90-11)

THE TONUTTI ROTARY HAY RAKES HAVE BEEN ESPECIALLY DESIGNED FOR HIGH SPEED RAKING WITH MINIMUM CROP DAMAGE.

THESE RAKES ARE BUILT WITH THE BEST QUALITY SPHEROIDAL CAST IRON AND STEEL AND ARE COMPLETED WITH A HIGH QUALITY PAINT FINISH.

THE OIL BATH GEAR BOX IS THE RESULT OF HIGH QUALITY MANUFACTURING THAT ALLOW THESE MACHINES TO LAST AND PERFORM FOR YEARS.

ALL MODELS FEATURE REMOVABLE TYNE ARMS TO ALLOW FOR A NARROWER TRANSPORT WIDTH AND TO MINIMIZE THE SPACE REQUIRED FOR WINTER STORAGE.

 

 

 

 

  ROTARY RW90 11 HAY RAKE  > >

 

 

 

 

            ROTARY ORCHARD HAY RAKE

                               GR RAMI 160

 

THE TONUTTI ROTARY ORCHARD RAKE IS DESIGNED FOR RAKING AFTER ANY TYPE OF PRUNING OPERATION, MAKING EVENTUAL COLLECTION OF CUTTINGS BETWEEN ROWS EASIER.

THE OIL BATH GEARBOX IS MANUFACTURED BY STEEL AND SPHEROIDAL CAST IRON.  THE 3 POINT LINKAGE ALLOWS FOR BETTER MANEUVERABILITY  BETWEEN THE TREES, AND FEATURES AN AUTOMATIC BREAK-AWAY DEVICE.

 

 

 

                   TONNUTI CARTED EAGLE HAY RAKES

 

             TONUTTI  CARTED EAGLE RAKE

 

 

 

THE NEW TONUTTI EAGLE HAY RAKE IS A REVOLUTIONARY NEW CONCEPT OF THE CARTED RAKES UNIQUENESS IN THE MARKET.  THE EAGLES' DESIGN WITH FINGER WHEELS IN FRONT OF THE FRAME ALLOWS FOR BETTER RAKING IN HEAVIER CROPPING CONDITIONS.  THIS ALSO PROVIDES FOR THE SMOOTH FLOW OF HAY THROUGH THE RAKE AND INTO THE WINDROW.

 

 

 

 

 

                                                                                                  WINDROW ADJUSTMENT MECHANISM

                                                                                         

FEATURES:

FINGER WHEELS IN FRONT OF THE FRAMES FOR BETTER RAKING IN HEAVY CROPS

FINGER WHEELS INSIDE THE FRAMES FOR SAFETY AND NARROW WIDTH DURING TRANSPORTATION.

LARGE WHEELS AND TIRES.

POWDER COAT PAINT.

HIGH CLEARANCE FROM THE GROUND DURING TRANSPORT.

TELESCOPIC ADJUSTABLE DRAW-BAR.

QUICK ACTION INTO OPERATING POSITION.

GREASE ZERKS ON PIVOTING ARMS.

ADJUSTABLE HITCH.                                                                   EASY and QUICK ASSEMBLY.

 

 SPECIFICATIONS:

 MODEL EAGLE 10
 Description Carted
 Ground Wheels
 2
 Splitter Wheels
 Yes
 Raking Wheels
 10
 Power Requirements
 20 HP
 Weight 1876 lbs.
 Transport Width
 10'
 Speed 14 MPH
 Tires 205/65-15
 Rake Wheel Diameter
 55"
 Max. Raking Width
 23'

 

               TONUTTI  MILLENIUM  V  HAY RAKES

 

   MILLENIUM PULL-TYPE V HAY RAKE

A simple adjustment to the last two rake wheels will determine your windrow width.  No more nuts and bolts to unscrew or tighten, no more sliding rear cross frame members, no more mechanical adjustments on the rear frame, and no more hydraulic settings.

The last two rake wheels are mounted on the back of the rear frame and they can be completely folded in during transport.  This technical solution reduces the length of side frames (about 3' 4") allowing for:

  • Better maneuverability both in working and transport position.
  • Greater structural strength compared to other rakes of this size.

New & Improved Features Take The Millenium to The Very Top.

Performance Features:

  • New parallel linkage arms opening-closing hydraulic system for better contour following.
  • New central sliding draw bar that shortens by 5' in working position improves rake strength and maneuverability.
  • Nylon lubrication-free slides on draw bar mechanism.
  • New windrow width adjusting mechanism (an optional electrical kit for easy operation from tractor seat is available).
  • Fully articulated opening arms for better raking on uneven terrains.
  • Height limiter to prevent rake wheel arms from jumping.
  • New optional center splitter wheels.
  • Higher rake wheels height in transport position (17").
  • Higher rear frame clearance (4' 7") for better discharge of heavy crop.
  • Fixed rear frame for better solidity and stability.
  • Swivel wheels axis closer to frame to prevent frame torsion.

  

 

 

 TONUTTI MILLENIUM V HAY RAKE   > > >

     FIXED REAR FRAME & HIGH CLEARANCE

          LIGHT KIT AVAILABLE (Optional)

 

 

 

 SPECIFICATIONS:

 MODEL MILLENIUM 16
 MILLENIUM 18
 MILLENIUM 20
 Description High Capacity V
 Heavy Duty V
 Heavy Duty V
 Ground Wheels
4
7

 Splitter Wheels
Yes
Yes
Yes
 Raking Wheels
 1618
20
 Power Requirements
 40 HP
40 HP
40 HP
 Weight4290 lbs.
 5588 lbs.
 5808 lbs.
 Transport Width
 10'10'
10'
 Speed 14 MPH
14 MPH
14 MPH
 Tires 205/60-15205/60-15
205/60-15
 Rake Wheel Diameter
 55" 55"55"
 Max. Raking Width
 31' 4"
 35' 38' 8"

 

                     TONUTTI JUMBO HAY RAKES

JUMBO 2GW SERIES HAY RAKE

 

THE TONUTTI JUMBO 4GW and 2GW "V" RAKES ARE PART OF THE FINGER WHEEL RAKE RANGE. 

THEY ARE SPECIFICALLY DESIGNED FOR USE WHEN HARVESTING HAY WITH BIG CAPACITY BALERS, PROVIDING WINDROW WIDTHS ADJUSTABLE FROM 3' TO 6'.

ALL FINGER WHEELS ARE INDEPENDENTLY SPRING-LOADED, ALLOWING EACH FINGER WHEEL TO FOLLOW THE CONTOURS OF THE LAND.

THE SPECIAL FLEXIBLE STEEL TINES PICK UP THE HAY, WHILE GENTLY FORMING THE CROP INTO FLUFFY WINDROWS FOR BALING OR CHOPPING.

A DUAL HYDRAULIC SYSTEM CONTROLLED FROM THE TRACTOR SEAT ALLOW THE OPERATOR TO RAISE AND LOWER THE FINGER WHEELS FROM THE TRACTOR SEAT.

THE SECOND SYSTEM OPENS AND CLOSES BOTH SIDES OF THE RAKE, FROM THE NARROW 8' TRANSPORT POSITION, TO THE FULL WORKING WIDTH.

                                       4 GW V SERIES JUMBO TONUTTI HAY RAKE

 

FEATURES: 

  •  THE 4 GROUND WHEEL (4GW) IS THE PROVEN PERFORMER WHERE BIG AREAS ARE TO BE RAKED.
  •  THE 2 GROUND WHEEL (2GW) FEATURES JUST 2 GROUND WHEELS, OFFERING GREAT MANEUVERABILITY IN   TIGHT SITUATIONS

THEY BOTH OFFER:

  •  INDEPENDENTLY SUSPENDED TINE WHEELS
  •  HYDRAULIC WIDTH CONTROL
  •  OPEN FACE RAKING

THIS ENABLES YOU TO TURN THE CROP INTO LARGE FLUFFY WINDROWS, READY FOR THE HUNGRIEST BALER.

 

 SPECIFICATIONS

  MODEL                   
 No. of Tine Wheels
 V8 - 2GW
 8
 V10 - 2GW
 10
 T10 - 4GW
 10
 T12 - 4GW
 12
 V10 - 4GW
 10
 V12 - 4GW
 12
 V14 - 4GW
 14

 

 THANK YOU FOR VISITING OUR WEBSITE

 PLEASE CALL FENTON REPAIR AND ASK FOR DAVE AT 1-563-933-4321 WITH ANY QUESTIONS YOU MAY HAVE!

PLEASE COME AGAIN!